VALID 350-401 Exam Dumps For Certification Exam Preparation
350-401 Dumps PDF 2023 Strategy Your Preparation Efficiently
The Cisco 350-401 exam is ideal for network engineers and administrators who are looking to advance their careers by obtaining a CCNP certification. The certification validates the individual's expertise in implementing and managing enterprise-level infrastructures and is highly regarded by employers globally. Being a part of the CCNP certification program, the exam also serves as a stepping stone for professionals who are looking to pursue more advanced Cisco certifications, such as the Cisco Certified Internetwork Expert (CCIE).
The Cisco 350-401 exam is an integral part of the Cisco Certified Network Professional (CCNP) Enterprise certification. This certification is designed for network professionals who want to advance their careers in the field of enterprise networking. To obtain the CCNP Enterprise certification, candidates must pass two exams, one of which is the Cisco 350-401 ENCOR exam.
Exam topics
You should know that Cisco 350-401 covers six different topics and each has its specific components. The percentage associated with each of them informs the weight that each objective has in the questions. This means that the sections with the higher percentages will likely have more questions than those with lower figures. The domains covered in this test are highlighted below:
- Infrastructure: 30%;
- Automation: 15%;
- Security: 20%;
Let’s look at these 6 topic areas that are covered in the 350-401 certification exam and explore their special aspects in detail.
NEW QUESTION # 372 
Refer to the exhibit. Which set of commands is required to configure and verify the VRF for Site 1 Network A on router R1?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 373
Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose two.)
- A. APs that operate in FlexConnect mode cannot detect rogue APs
- B. FlexConnect mode is a wireless solution for branch office and remote office deployments
- C. When connected to the controller, FlexConnect APs can tunnel traffic back to the controller
- D. FlexConnect mode is a feature that is designed to allow specified CAPWAP-enabled APs to exclude themselves from managing data traffic between clients and infrastructure.
- E. FlexConnect mode is used when the APs are set up in a mesh environment and used to bridge between each other.
Answer: C,D
NEW QUESTION # 374
Drag and drop the characteristics from the left onto the infrastructure deployment models on the right.
Answer:
Explanation:
NEW QUESTION # 375
Refer to the exhibit.
Refer to the exhibit. Which configuration is required to summarize the Area 2 networks that are advertised to Area 0?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: A
NEW QUESTION # 376 
Refer to the exhibit. Which configuration must be applied to R1 to enable R1 to reach the server at 172.16.0.1?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 377
Refer to the exhibit.
An engineer must deny Telnet traffic from the loopback interface of router R3 to the loopback interface of router R2 during the weekend hours. All other traffic between the loopback interfaces of routers R3 and R2 must be allowed at all times. Which command accomplish this task?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: A
NEW QUESTION # 378
Which two methods are used by an AP that is typing to discover a wireless LAN controller? (Choose two.)
- A. querying other APs
- B. Cisco Discovery Protocol neighbour
- C. DHCP Option 43
- D. broadcasting on the local subnet
- E. DNS lookup cisco-DNA-PRIMARY.localdomain
Answer: C,D
Explanation:
A Cisco lightweight wireless AP needs to be paired with a WLC to function.
An AP must be very diligent to discover any controllers that it can join-all without any preconfiguration on your part. Toaccomplish this feat, several methods of discovery are used. The goal of discovery is just to build a list of live candidatecontrollers that are available, using the following methods: + Prior knowledge of WLCs + DHCP and DNS information to suggest some controllers (DHCP Option 43) + Broadcast on the local subnet to solicit controllers
Reference:
If you do not tell the LAP where the controller is via DHCP option 43, DNS resolution of "Cisco-capwap-controller.local_domain", or statically configure it, the LAP does not know where in the network to find the managementinterface of the controller.
In addition to these methods, the LAP does automatically look on the local subnet for controllers with a 255.255.255.255local broadcast.
NEW QUESTION # 379
What are three valid HSRP states? (Choose three)
- A. listen
- B. full
- C. IN IT
- D. learning
- E. speak
- F. established
Answer: A,D,E
Explanation:
HSRP consists of 6 states:
Please notice that not all routers in a HSRP group go through all states above. In a HSRP group, only one router reaches active state and one router reaches standby state. Other routers will stop at listen state.
NEW QUESTION # 380
Refer to the exhibit.
Which statement about the OPSF debug output is true?
- A. The output displays OSPF hello messages which router R1 has sent received on interface Fa0/1.
- B. The output displays OSPF hello and LSACK messages which router R1 has sent or received.
- C. The output displays all OSPF messages which router R1 has sent to received on interface Fa0/1.
- D. The output displays all OSPF messages which router R1 has sent or received on all interfaces.
Answer: A
Explanation:
Explanation
This combination of commands is known as "Conditional debug" and will filter the debug output based on your conditions. Each condition added, will behave like an 'And' operator in Boolean logic. Some examples of the "debug ip ospf hello" are shown below:
NEW QUESTION # 381
Which two solutions are used for backing up a Cisco DNA Center Assurance database? (Choose two)
- A. non-linux server
- B. NFS share
- C. remote server
- D. bare metal server
- E. local server
Answer: B,D
Explanation:
Cisco DNA Center creates the backup files and posts them to a remote server. Each backup is uniquely stored using the UUID as the directory name.To support Assurance data backups, the server must be a Linux-based NFS server that meets the following requirements: - Support NFS v4 and NFS v3. - Cisco DNA Center stores backup copies of Assurance data on an external NFS device and automation data on an external remote sync (rsync) target location. - The remote share for backing up an Assurance database (NDP) must be an NFS share.
NEW QUESTION # 382
Which Python snippet should be used to store the devices data structure in a JSON file?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: A
NEW QUESTION # 383 
Refer to the exhibit Drag and drop the snippets into the RESTCONF request to form the request that returns this response Not all options are used
Answer:
Explanation:
NEW QUESTION # 384
Which QoS queuing method transmits packets out of the interface in the order the packets arrive?
- A. priority
- B. FIFO
- C. custom
- D. weighted- fair
Answer: B
NEW QUESTION # 385
When configuration WPA2 Enterprise on a WLAN, which additional security component configuration is required?
- A. PKI server
- B. NTP server
- C. TACACS server
- D. REDIUS server
Answer: D
Explanation:
Deploying WPA2-Enterprise requires a RADIUS server, which handles the task of authenticating network users access. The actual authentication process is based on the 802.1X policy and comes in several different systems labelled EAP. Because each device is authenticated before it connects, a personal, encrypted tunnel is effectively created between the device and the network.
Reference: https://www.securew2.com/solutions/wpa2-enterprise-and-802-1x-simplified/
NEW QUESTION # 386
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 387
Refer to the exhibit.
Refer to the exhibit. Rapid PVST+ is enabled on all switches. Which command set must be configured on switch1 to achieve the following results on port fa0/1?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 388
Which two operations are valid for RESTCONF? (Choose two.)
- A. ADD
- B. REMOVE
- C. HEAD
- D. PATCH
- E. PULL
- F. PUSH
Answer: C,D
Explanation:
Explanation
RESTCONF operations include OPTIONS, HEAD, GET, POST, PATCH, DELETE.
NEW QUESTION # 389
How is a data modeling language used?
- A. To provide human readability to scripting languages
- B. To represent finite and well-defined network elements that cannot be changed
- C. To model the flows of unstructured data within the infrastructure
- D. To enable data lo be easily structured, grouped, validated, and replicated
Answer: D
NEW QUESTION # 390
A customer has several small branches and wants to deploy a WI-FI solution with local management using CAPWAP.
Which deployment model meets this requirement?
- A. Local mode
- B. Autonomous
- C. Mobility express
- D. SD-Access wireless
Answer: C
Explanation:
Mobility Express is the ability to use an access point (AP) as a controller instead of a real WLAN controller. But this solution is only suitable for small to midsize, or multi-site branch locations where you might not want to invest in a dedicated WLC. A Mobility Express WLC can support up to 100 APs. Mobility Express WLC also uses CAPWAP to communicate to other APs.
Note: Local mode is the most common mode that an AP operates in. This is also the default mode. In local mode, the LAP maintains a CAPWAP (or LWAPP) tunnel to its associated controller.
NEW QUESTION # 391
Refer to the exhibit.
An engineer must establish eBGP peering between router R3 and router R4. Both routers should use their loopback interfaces as the BGP router ID. Which configuration set accomplishes this task?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: A
NEW QUESTION # 392
Which tunneling technique is used when designing a Cisco SD-Access fabric data plane?
- A. VXLAN
- B. LISP
- C. VRF Lite
- D. VRF
Answer: A
Explanation:
Explanation
The tunneling technology used for the fabric data plane is based on Virtual Extensible LAN (VXLAN).
VXLAN encapsulation is UDP based, meaning that it can be forwarded by any IP-based network (legacy or third party) and creates the overlay network for the SD-Access fabric. Although LISP is the control plane for the SD-Access fabric, it does not use LISP data encapsulation for the data plane; instead, it uses VXLAN encapsulation because it is capable of encapsulating the original Ethernet header to perform MAC-in-IP encapsulation, while LISP does not. Using VXLAN allows the SD-Access fabric to support Layer 2 and Layer
3 virtual topologies (overlays) and the ability to operate over any IP-based network with built-in network segmentation (VRF instance/VN) and built-in group-based policy.
Reference: CCNP and CCIE Enterprise Core ENCOR 350-401 Official Cert Guide
NEW QUESTION # 393
Drag and drop the characteristics from the left onto the protocols they apply to on the right?
Answer:
Explanation:
Explanation
Diagram Description automatically generated
NEW QUESTION # 394
What would be the preferred way to implement a loopless switch network where there are 1500 defined VLANs and it is necessary to load the shared traffic through two main aggregation points based on the VLAN identifier?
- A. 802.1W
- B. 802.1D
- C. 802.1AE
- D. 802.1s
Answer: D
NEW QUESTION # 395
......
Latest Verified & Correct 350-401 Questions: https://exampasspdf.testkingit.com/Cisco/latest-350-401-exam-dumps.html