NCM-MCI-5.20 Exam Dumps Pass with Updated 2023 Certified Exam Questions
NCM-MCI-5.20 Exam Questions - Real & Updated Questions PDF
The Nutanix NCM-MCI-5.20 certification exam covers a wide range of topics related to deploying and managing Nutanix solutions for multicloud infrastructures. This includes understanding the architecture and design of Nutanix solutions, deploying and configuring Nutanix solutions, managing and monitoring Nutanix solutions, and optimizing Nutanix solutions for performance and scalability.
NEW QUESTION # 58
An administrator needs to migrate workloads from a Nutanix cluster running VMware ESXi to Nutanix AHV. The migration process needs to be completed in multiple VM groups and support roll back in case any problems are found during user acceptance testing.
Which action should the administrator perform?
- A. Use Nutanix one-click cluster conversion from ESXi to AHV
- B. Use VMware Converter
- C. Use Cross Hypervisor DR to replicate VMs from ESXi to AHV
- D. Use storage live migration
Answer: A
NEW QUESTION # 59
A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?
- A. One VM out of the four powers down when the node hosting it reboots.
- B. The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.
- C. One node hosts two VMs while the node being upgraded is in maintenance mode.
- D. The AHV pre-upgrade checks fail until the four VMs are powered off.
Answer: B
NEW QUESTION # 60
Refer to the exhibit.
An administrator receive the warning massages shown in the exhibit while validating cluster conversion from EXSi to AHV.
What should the administrator do to address this warning in v Center Server?
- A. Keep homogeneous adapter as active and standby
- B. Remove the standby adapters under Teaming and Failover.
- C. Keep active adapters od different speeds as active standby
- D. Remove adapters that are active but not homogeneous.
Answer: A
NEW QUESTION # 61
An administrator is trying to correct high cluster IOPs and Cluster Controller Latency. Networking is the suspected issue.
Which networking parameters should be configured in the Nutanix cluster?
- A. Number of NICs connected and bond state.
- B. Number of NICs connected and network latency.
- C. Bond State and network latency
- D. Number of NICs connected and frame size
Answer: D
NEW QUESTION # 62
An administrator is deploying an application that requires maximum I/O throughput for scratch dat a. The administrator is concerned that the throughput requirement is greater than what can be provided by a single cluster node.
What should the administrator do to meet this requirement?
- A. Create a volume group with several virtual disks and attach to the VM
- B. Create a virtual disk attached to the VM's PCI interface
- C. Create several virtual disks attached to the VM's virtual SCSI controller
- D. Create a volume group with one virtual disk attached to the VM
Answer: A
NEW QUESTION # 63
An administrator needs to determine current CPU usage across multiple clusters.
Which method should the administrator use to generate this type of report?
- A. Prism Central, Explore, Hosts
- B. Prism Central, Home, Manage Dashboards
- C. Prism Central, Explore, Clusters
- D. Prism Central, Home, Add Widgets
Answer: D
NEW QUESTION # 64
An administrator wants to utilize Network Visualization to monitor the physical and logical network on the Nutanix cluster. The first-hop switch has LLDP enabled. The network switch information is still not being displayed.
What is causing this problem?
- A. SNMP is not configured properly.
- B. The ISL between switches is not configured.
- C. The cluster is using RDMA-enabled NICs.
- D. br0 and br1 are not defined.
Answer: A
NEW QUESTION # 65
An administrator deletes a large amount of data from a Volume Group presented to a Linux VM. The administrator notices that the deleted data has not been reclaimed as usable storage.
What action should be taken to reclaim the storage capacity?
- A. Shrink the Volume Group that is associated with the Linux VM
- B. Unmount the Volume Group and then Remount the Volume Group
- C. Run Defrag on the Linux VM
- D. Enable the unman operation on the Linux VM
Answer: B
Explanation:
https://next.nutanix.com/how-it-works-22/vm-capacity-and-prism-capacity-are-different-33134
NEW QUESTION # 66
An administrator receives a notification that storage in a Nutanix cluster is unavailable. The cluster consists of five nodes and is configured with a Fault-Tolerance level of 1 (FT-1).
Upon investigation, the administrator finds the following:
* All AHV hosts are powered on and the CVMs are running
* Nodes A, B, and C are connected to one top of rack switch
* Nodes D and E are connected to a second top of rack switch
* The cluster status command run on Node A shows that CVM services on nodes D and E are down Which issue is causing the storage outage?
- A. The default gateway for the CVMs and AHV hosts is down.
- B. The genesis process is down on both Nodes D and E.
- C. Nodes D and E are in maintenance mode.
- D. The switch connecting Nodes D and E is down.
Answer: D
Explanation:
https://hyperhci.com/2020/07/29/nutanix-cluster-services-down-troubleshooting/
NEW QUESTION # 67
An administrator has a 4-node Nutanix cluster running on AHV. The administrator creates a new storage container and makes that all available to all hosts.
Which storage protocol is used for Virtual Machines to access virtual disks on the storage container?
- A. Fiber Channel
- B. NFS
- C. iSCSI
- D. SMB/CIFS
Answer: C
NEW QUESTION # 68
A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:
* AHV nodes
* SAP HANA version 2
* Production database files
Which configuration should be recommended to the customer?
- A. Do not enable compression, deduplication. or erasure coding on the storage container
- B. Start with a cluster containing three or more nodes
- C. Plate the SAP HANA Database on the same socket as CVM
- D. Enable only compression for the container that contains the Production database
Answer: A
Explanation:
Reference:
NEW QUESTION # 69
An administrator is notified that a bare metal database server is down. This database server is being served storage using a Nutanix Volume Group. Upon investigating, the administrator finds that the disks in the database server that map to the vDisks in the volume group have gone offline.
What is causing this issue?
- A. Port 9443 is blocked in the server firewall.
- B. A CVM serving the Volume Group has gone offline.
- C. The Volume Group Load Balancer has been disabled.
- D. Port 3260 has been blocked in the server firewall.
Answer: B
NEW QUESTION # 70
A customer needs a DR solution designed around the following requirements:
* There are 8 ms of latency between Sites A and B
* The administrator needs the shortest RPO/RTO possible
* Application consistent snapshots are required
* Use of Nutanix VSS
Which Data Protection Method should be used?
- A. Async
- B. Cloud Connect
- C. Near Sync
- D. Metro Availability
Answer: C
NEW QUESTION # 71
An administrator receives reports that VDI desktop performance in an 8-node Nutanix VDI environment is poor. Opening applications takes between 1 and 2 minutes.
When investigating the issue, the following conditions are found:
* Cluster memory utilization: 80%
* Cluster SSD utilization: 70%
* Average VM CPU Wait Time: 11%
* CVM CPU utilization: 75%
Which action should be taken to improve VDI performance?
- A. Increase the amount of SSD storage in the cluster.
- B. Add CPU resources to the cluster.
- C. Increase the number of vCPU cores allocated to the CVM.
- D. Add memory to the nodes in the cluster.
Answer: B
NEW QUESTION # 72
Refer to the exhibit.
A Nutanix host is connected as shown in the exhibit with br0-up set to active/backup. Physical Switch 1 experiences a power outage causing br0-up to failover to using eth2. The CVM and host become inaccessible. User VMs restart on other hosts in the cluster, which causes a disruption to those VMs.
Which configuration issue likely caused this outage?
- A. The user VMs only have one NIC
- B. The CVM should have eth1 connected to the OVS.
- C. The upstream port for eth2 is missing a VLAN.
- D. Bridge br0-up should be configured to use balance-tcp rather than active/backup.
Answer: C
NEW QUESTION # 73
An administrator is managing two AHV and vSphere-Based Clusters. The administrator is able to install a Windows Guest OS from an ISO Image to VMWare VMs , but is unable to do the same activity with AHV VMs.
What should the administrator do to successfully perform this action with AHV VMs?
- A. Manag Nutanix Guest tools
- B. Change VM Setting From BIOS to UEFI
- C. Verify cluster iSCSI data Services IP
- D. Provide virtIO Drivers
Answer: D
NEW QUESTION # 74
......
The Nutanix NCM-MCI-5.20 certification exam is an essential certification for IT professionals who are looking to advance their careers in cloud computing and infrastructure management. The certification exam validates the skills and knowledge required to manage and deploy cloud-based solutions across multiple clouds, making certified professionals highly sought after in the IT industry. The certification exam is recognized globally, providing certified professionals with new opportunities to work on complex cloud-based projects and advance their careers.
Pass Guaranteed Quiz 2023 Realistic Verified Free Nutanix: https://exampasspdf.testkingit.com/Nutanix/latest-NCM-MCI-5.20-exam-dumps.html